From dad10f7ad7e70c4438995477d65747cab0510102 Mon Sep 17 00:00:00 2001 From: hwdsl2 <hwdsl2@users.noreply.github.com> Date: Thu, 25 Aug 2016 23:34:16 -0500 Subject: [PATCH] Update docs - Fix instructions for Shrew Soft client - [ci skip] --- docs/clients-xauth-zh.md | 3 ++- docs/clients-xauth.md | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/docs/clients-xauth-zh.md b/docs/clients-xauth-zh.md index 3155d3a..c4592ce 100644 --- a/docs/clients-xauth-zh.md +++ b/docs/clients-xauth-zh.md @@ -26,13 +26,14 @@ 1. 单击 **Authentication** 选项卡，从 **Authentication Method** 下拉菜单中选择 **Mutual PSK + XAuth**。 1. 单击 **Credentials** 子选项卡，并在 **Pre Shared Key** 字段中输入`你的 VPN IPsec PSK`。 1. 单击 **Phase 1** 选项卡，从 **Exchange Type** 下拉菜单中选择 **main**。 +1. 单击 **Phase 2** 选项卡，从 **HMAC Algorithm** 下拉菜单中选择 **sha1**。 1. 单击 **Save** 保存 VPN 连接的详细信息。 1. 选择新添加的 VPN 连接。单击工具栏中的 **Connect** 按钮。 1. 在 **Username** 字段中输入`你的 VPN 用户名`。 1. 在 **Password** 字段中输入`你的 VPN 密码`。 1. 单击 **Connect**。 -VPN 连接成功后，会在 VPN Connect 状态窗口中显示 **tunnel enabled** 字样。最后你可以到<a href="https://www.whatismyip.com" target="_blank">这里</a>检测你的 IP 地址，应该显示为`你的 VPN 服务器 IP`。 +VPN 连接成功后，你会在 VPN Connect 状态窗口中看到 **tunnel enabled** 字样。单击 "Network" 选项卡，并确认 **Established - 1** 显示在 "Security Associations" 下面。最后你可以到<a href="https://www.whatismyip.com" target="_blank">这里</a>检测你的 IP 地址，应该显示为`你的 VPN 服务器 IP`。 **注：** 在首次连接之前需要<a href="https://documentation.meraki.com/MX-Z/Client_VPN/Troubleshooting_Client_VPN#Windows_Error_809" target="_blank">修改一次注册表</a>，以解决 VPN 服务器 和/或 客户端与 NAT （比如家用路由器）的兼容问题。请参照链接网页中的说明，或者打开<a href="http://www.cnblogs.com/xxcanghai/p/4610054.html" target="_blank">提升权限命令提示符</a>并运行以下命令。完成后必须重启计算机。 - 适用于 Windows Vista, 7, 8 和 10 diff --git a/docs/clients-xauth.md b/docs/clients-xauth.md index db6989e..b728203 100644 --- a/docs/clients-xauth.md +++ b/docs/clients-xauth.md @@ -26,13 +26,14 @@ After <a href="https://github.com/hwdsl2/setup-ipsec-vpn" target="_blank">settin 1. Click the **Authentication** tab. Select **Mutual PSK + XAuth** from the **Authentication Method** drop-down menu. 1. Click the **Credentials** tab below. Enter `Your VPN IPsec PSK` in the **Pre Shared Key** field. 1. Click the **Phase 1** tab. Select **main** from the **Exchange Type** drop-down menu. +1. Click the **Phase 2** tab. Select **sha1** from the **HMAC Algorithm** drop-down menu. 1. Click **Save** to save the VPN connection details. 1. Select the new VPN connection. Click the **Connect** button on toolbar. 1. Enter `Your VPN Username` in the **Username** field. 1. Enter `Your VPN Password` in the **Password** field. 1. Click **Connect**. -Once connected, you will see **tunnel enabled** in the VPN Connect status window. You can verify that your traffic is being routed properly by <a href="https://encrypted.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`". +Once connected, you will see **tunnel enabled** in the VPN Connect status window. Click the "Network" tab, and confirm that **Established - 1** is displayed under "Security Associations". You can verify that your traffic is being routed properly by <a href="https://encrypted.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`". **Note:** This <a href="https://documentation.meraki.com/MX-Z/Client_VPN/Troubleshooting_Client_VPN#Windows_Error_809" target="_blank">one-time registry change</a> is required if the VPN server and/or client is behind NAT (e.g. home router). Refer to the linked web page, or run the following from an <a href="http://www.winhelponline.com/blog/open-elevated-command-prompt-windows/" target="_blank">elevated command prompt</a>. You must reboot your computer when finished. - For Windows Vista, 7, 8 and 10