diff --git a/wireguard-add-client.sh b/wireguard-add-client.sh
new file mode 100644
index 0000000..955c7c6
--- /dev/null
+++ b/wireguard-add-client.sh
@@ -0,0 +1,129 @@
+#!/bin/bash
+
+# This adds an additional client based on the last created client config file in the current
+# directory
+
+
+nextip(){
+    IP=$1
+    IP_HEX=$(printf '%.2X%.2X%.2X%.2X\n' `echo $IP | sed -e 's/\./ /g'`)
+    NEXT_IP_HEX=$(printf %.8X `echo $(( 0x$IP_HEX + 1 ))`)
+    NEXT_IP=$(printf '%d.%d.%d.%d\n' `echo $NEXT_IP_HEX | sed -r 's/(..)/0x\1 /g'`)
+    echo "$NEXT_IP"
+}
+
+nextipv6(){
+    IP=$1
+    IP_HEX=$(ipv6calc -q --printfulluncompresse $1 | sed -e 's/\://g' | tr [a-f] [A-f] )
+    NEXT_IP_HEX=`echo "obase=16 ; ibase=16; $IP_HEX + 1" | bc`
+    echo ${NEXT_IP_HEX:0:4}:${NEXT_IP_HEX:4:4}:${NEXT_IP_HEX:8:4}:${NEXT_IP_HEX:12:4}:${NEXT_IP_HEX:16:4}:${NEXT_IP_HEX:20:4}:${NEXT_IP_HEX:24:4}:${NEXT_IP_HEX:28:4}/64 | ipv6calc --printcompressed
+}
+
+if [ "$EUID" -ne 0 ]; then
+    echo "You need to run this script as root"
+    exit 1
+fi
+
+if [ "$(systemd-detect-virt)" == "openvz" ]; then
+    echo "OpenVZ is not supported"
+    exit
+fi
+
+if [ "$(systemd-detect-virt)" == "lxc" ]; then
+    echo "LXC is not supported (yet)."
+    echo "WireGuard can technically run in an LXC container,"
+    echo "but the kernel module has to be installed on the host,"
+    echo "the container has to be run with some specific parameters"
+    echo "and only the tools need to be installed in the container."
+    exit
+fi
+
+# Check OS version
+if [[ -e /etc/debian_version ]]; then
+    source /etc/os-release
+    OS=$ID # debian or ubuntu
+elif [[ -e /etc/fedora-release ]]; then
+    OS=fedora
+elif [[ -e /etc/centos-release ]]; then
+    OS=centos
+elif [[ -e /etc/arch-release ]]; then
+    OS=arch
+else
+    echo "Looks like you aren't running this script on a Debian, Ubuntu, Fedora, CentOS or Arch Linux system"
+    exit 1
+fi
+
+# Install tools
+
+if [[ ! $(which ipv6calc) ]]; then
+    if [[ "$OS" = 'ubuntu' ]]; then
+        apt-get install -y "ipv6calc"
+    elif [[ "$OS" = 'debian' ]]; then
+        apt-get install -y "ipv6calc"
+    elif [[ "$OS" = 'arch' ]]; then
+        pacman -Sy --noconfirm ipv6calc
+    fi
+fi
+
+SERVER_WG_NIC="wg0"
+read -rp "WireGuard interface name: " -e -i "$SERVER_WG_NIC" SERVER_WG_NIC
+
+
+if [[ -e /etc/wireguard/$SERVER_WG_NIC.conf ]]; then
+	WG_SERVER_CONF="/etc/wireguard/$SERVER_WG_NIC.conf"
+else
+	echo "Looks like there is no configuration at $WG_SERVER_CONF for wireguard interface $SERVER_WG_NIC"
+	exit 1
+fi
+
+CLIENT_WG_NAME=$(openssl rand -base64 24 | tr -d "=+/" | cut -c1-16)
+read -rp "WireGuard client name: " -e -i "$CLIENT_WG_NAME" CLIENT_WG_NAME
+
+CLIENT_PRIV_KEY=$(wg genkey)
+CLIENT_PUB_KEY=$(echo "$CLIENT_PRIV_KEY" | wg pubkey)
+
+SERVER_PUB_KEY=$(wg | grep 'public key' | head -n 1 | sed 's/public key: //')
+
+SERVER_ENDPOINT=$(cat *-client.conf | grep 'Endpoint' | head -n1 | sed 's/Endpoint = //')
+
+PRESHARED_KEY=$(cat *-client.conf | grep 'PresharedKey' | head -n1 | sed 's/PresharedKey = //')
+
+LAST_IP=$( cat $(ls -t *-client.conf | head -n1) | grep Address | sed 's/Address = //' | cut -d ',' -f1 | sed 's/\/24//' )
+CLIENT_WG_IPV4=$( nextip $LAST_IP )
+read -rp "Client's WireGuard IPv4 " -e -i "$CLIENT_WG_IPV4" CLIENT_WG_IPV4
+
+LAST_IPV6=$(cat $(ls -t *-client.conf | head -n1) | grep Address | sed 's/Address = //' | cut -d ',' -f2 | sed 's/\/64//')
+CLIENT_WG_IPV6=$( nextipv6 $LAST_IPV6 | sed 's/\/64//' )
+read -rp "Client's WireGuard IPv6 " -e -i "$CLIENT_WG_IPV6" CLIENT_WG_IPV6
+
+# Adguard last added clients dns by default.
+# echo "Enterprise users should use there internal DNS Servers in Windows environments this are usually the domain controllers"
+
+CLIENT_DNS=$(cat *-client.conf | grep 'DNS = ' | head -n1 | sed 's/DNS = //')
+
+# Add the client as a peer to the server
+echo "
+[Peer]
+# $CLIENT_WG_NAME
+PublicKey = $CLIENT_PUB_KEY
+AllowedIPs = $CLIENT_WG_IPV4/32,$CLIENT_WG_IPV6/128" >> "/etc/wireguard/$SERVER_WG_NIC.conf"
+
+# Create client file with interface
+echo "[Interface]
+PrivateKey = $CLIENT_PRIV_KEY
+Address = $CLIENT_WG_IPV4/24,$CLIENT_WG_IPV6/64
+DNS = $CLIENT_DNS" > "$HOME/$CLIENT_WG_NAME-client.conf"
+
+# Add the server as a peer to the client
+echo "
+[Peer]
+PublicKey = $SERVER_PUB_KEY
+Endpoint = $SERVER_ENDPOINT
+AllowedIPs = 0.0.0.0/0,::/0" >> "$HOME/$CLIENT_WG_NAME-client.conf"
+
+if [[ $PRESHARED_KEY ]]; then
+# Add pre shared symmetric key to client-conf file
+        echo "PresharedKey = $PRESHARED_KEY" >> "$HOME/$CLIENT_WG_NAME-client.conf"
+fi
+
+qrencode -t ansiutf8 -l L < "$HOME/$CLIENT_WG_NAME-client.conf"